Muffler

$3.93$17.64
people are viewing this right now
Clear
Guaranteed Safe Checkout
Image Safe Checkout
  • Free worldwide shipping on all orders over $100
  • Delivers in: 3-7 Working Days Shipping & Return
SKU: N/A Category:
  

Brass Silencer/Muffler Dimensions (Units in mm)

Part No. Part No. Port (NPT) A B (hex) C D (hex) E (closed)
BSL N1/8 BESL N1/8 1/8″ 22.7 12 25 12 9.7
BSL N1/4 BESL N1/4 1/4″ 28.5 15 25.3 14 11.7
BSL N3/8 BESL N3/8 3/8″ 35.7 18 29.6 17 15.8
BSL N1/2 BESL N1/2 1/2″ 39.3 21 35.8 21 21.1
Dimensions for Reference Use Only: Imperial fittings in mm, Metric fittings in mm, U.S.O.

 

Brass Fitting Operating Guide

    • Installation of Pipe Fittings
      • Apply an appropriate sealant to the thread, tighten the fitting by hand, then turn it 2 to 3 turns with a wrench until it reaches the desired torque listed below.
        Recommendation of Torque for Tightening Fittings
        Fitting Thread Size Torque, lb-ft Torque, kgf/cm
        NPT 1/8, R1/8 5 – 6.5 70 – 90
        NPT 1/4, R1/4 8.5 – 10 120 – 140
        NPT 3/8, R3/8 16 – 17.5 220 – 240
        NPT 1/2, R1/2 20 – 21.5 280 – 300

         

    • Installation of Tubing into Fitting:
      • Slowly push a clean and perpendicularly cut tube into the fitting until it comes to a dead stop.
      • Gently pull the tubing back until the Collet of the fitting grips onto the tubing and has a good seal.
      • Use Polyethylene, Polypropylene, Polyurethane, or Nylon tubing designed for instant fittings. Hard metal tubing, such as Stainless Steel tubing can be used if the tubing is grooved first.

 

    • Removal of Tubing from Fitting:
      • Push in evenly on the two sides of the Release Button.
      • Pull out the tube while depressing the Release Button.
      • To reuse the tubing, cut off the lodged portion of the previously used tubing in an even and perpendicular fashion.

 

    • Recommended Tubing Material, Size, and Hardness Requirements:
      Tubing Material Specified Size Tubing Size Tolerance
      Polyurethane +/- 0.004″ max. +/-0.1 mm max.
      Polyethylene +/- 0.006″ max. +/-0.15 mm max.
      Polypropylene +/- 0.004″ max. +/-0.1 mm max.
      Nylon +/- 0.004″ max. +/-0.1 mm max.
      Pre-grooved Metal Tubing +/- 0.004″ max. +/-0.1 mm max.

       

    • Storage:
      • Store fittings in a dry, cool place and away from sunlight.

 

  • Specifications, Materials of Construction, and Schematic of Typical Construction:
    Specifications
    Operating Pressure Range 0 – 250 PSI (0 – 1650 kpa)
    Vacuum 0 – 29.5″ Hg (750 mm Hg)
    Operating Temperature 5 – 230°F (-15 – 110°C)
    Recommended Tubing Material Polyurethane, Nylon, Polyethylene, Polypropylene. Hard metal tubing can be used if tubing is grooved first.
    Materials of Construction
    Metal Body Nickel-Plated Brass
    One piece combination Release Button & Collet Nickel-Plated Brass
    O-Ring/Packing NBR

      

Part No

BSL 10-32, BSL N1/8, BSL N1/4, BSL N3/8, BSL N1/2

Reviews

There are no reviews yet.